If the blue light on the Verizon router is blinking, it indicates that the router is in the WPS pairing mode. This might have occurred if you unintentionally touch the WPS button on the router’s front panel. However, it could also happen due to connectivity issues.
Typically, the blue light blinks for around 2 minutes, after which it should turn solid blue. This indicates that the router has successfully paired with a WPS device. However, if the blue light continues to blink for a longer duration, it means it is experiencing a technical bug or stuck in the pairing phase.
If you are facing a similar issue with the Verizon router, you are in the right place. In this article, we will discuss the possible causes of the Verizon router blinking blue issue and also provide a solution to fix it.
Reasons Why Verizon Router Blinking Blue
There can be several reasons why your router from Verizon router blinking a blue light. Some of the common causes are:
- It is in WPS pairing mode.
- It may be experiencing overheating.
- It is trying to connect to the network.
- It is using outdated firmware.
Verizon router blinking blue light can have different meanings.
- Slow Blinking Blue: This indicates that the router is in the pairing phase.
- Solid blue: This signifies a successful pairing with a WPS device.
Normally, when the router is in the pairing phase, the blue light should blink for just two minutes. After that becomes solid blue upon successfully connecting with WPS-enabled devices.
However, if the router continues to blink blue for a long time, it means there’s some technical problem.
The good news is that it Verizon wifi router blinking blue is a fixable issue. So if you ever encounter this problem, don’t panic. Just apply the right solution and resolve the issue.
Solutions To Fix Verizon Router Blinking Blue
After reading the above lines you should be familiar with the fact that Verizon router flashing blue light for a long time indicates an issue. On a positive note, resolving this problem is simple. Below, we present some easy solutions to fix the Verizon router blinking blue issue.
Solution #1: Restart Your Router
To eliminate the persistent blue blinking light on the Verizon router, perform a router restart. It is a simple yet effective measure to solve various router problems. If you are not sure how to restart a Verizon router, follow these steps.
- Start by powering off the router and unplug it from the power source.
- Disconnect the battery to make sure that the router is fully powered down.
- Wait for approximately 40 seconds.
- Now power on the router.
- Wait for the router to complete the start-up process.
- A successful connection will be indicated by a steady white light on your router.
If restarting the router doesn’t solve the issue, move on to the next solution.
Solution #2: Relocate The WPS Device
If the Verizon router continues to blink blue light without stopping, it may be due to the device being stuck in pairing mode. It refers to its disability to establish a connection with your WPS-enabled devices.
To address this issue, consider relocating your WPS devices closer to the router. This will enhance the chances of successful pairing and prevent any connection failures.
Once you have repositioned your WPS device closer to the router, the continuous blue blinking should cease.
If the blinking persists, move on to the following troubleshooting tip.
Solution #3: Perform A Router Power Cycle
Performing a power cycle on your router is similar to rebooting it. It involves cutting off all electricity to the device. When the router is powered on again after a cycle, it undergoes a hardware restart. If done correctly, it can help improve its performance.
To perform a power cycle, you should follow these steps:
- First of all, turn off the router.
- Wait for about 20 seconds, and then unplug the router from the power source.
- Wait for another 10 seconds, and then disconnect the power cable that is attached to the router.
- Wait for a further 5 minutes.
- Now reconnect all the cables in their required places, and turn them back on.
- Wait for the router to fully boot up.
- Check if the blinking light stabilizes.
This is an effective way to fix the Verizon router blinking blue. So there’s a good chance it will solve the issue you are facing.
Solution #4: Perform A Power Cycle On WPS Devices
If your WPS-enabled device is experiencing connectivity issues with the Verizon router, a power cycle may help resolve the problem.
The process of power cycling a WPS device is similar to that of a router. To avoid any confusion, we have detailed the steps below.
- Unplug the WPS device and cut off the power supply.
- Now wait for a couple of minutes to ensure the device is completely powered down.
- Re-plug the WPS device back into the power source.
- Once the booting is complete, you can proceed to pair the WPS device with your router.
The device should now be able to connect to the router successfully.
Solution #5: Check Wall Jack And Cables
Verizon router often indicates connectivity issues, which may be caused by loose cables or moisture in the router’s port or wall jack.
To troubleshoot these problems, follow these steps:
- Thoroughly examine the wall jack and all connected cables.
- Make sure that there is no moisture. Also, check if the cables are securely plugged in.
- Check for any signs of short circuits or damaged wires to prevent the issue from occurring again.
- In the end, clean all the cables as well as the ports with a microfiber cloth.
If you have completed the above steps and the router’s blue light continues to blink, proceed to the next troubleshooting step.
Solution #6: Check If There’s An Outage
One potential reason behind the Verizon router blinking blue could be a local internet outage. Such outages can prevent you from connecting to the network. In most cases, these outages are caused by emergency repairs or general maintenance.
If you think that your internet is down, you should consider checking if there’s an outage or ongoing maintenance in your area. Here are some tips you can follow:
- Ask your neighbors to find out if they are experiencing the same issue. This can help determine if the outage is localized to your area or more widespread.
- Contact your local ISP and inquire about any planned or emergency maintenance.
- Visit your ISP’s website and check if there is any scheduled maintenance going on in your area. For this, you will have to provide your postcode.
If this is what’s causing the problem, then you will need to wait for the problem to get fixed. Usually, outages don’t last for a long time. Once your router regains access to the internet the flashing blue light should stop.
Solution #7: Check if The Router Is Overheating
If the Verizon router has a flashing blue light, it might be due to overheating. If that happens, you can troubleshoot the issue by following these instructions.
- Disconnect the router’s power supply cable and allow it to rest for some time.
- Once the router has cooled down, plug the cables back in.
- Now power on the router and check if the issue persists.
To prevent overheating issues, consider the following measures:
- Avoid placing any objects on top of the router as it requires proper ventilation.
- Make sure that there’s no accumulated dirt or debris near the router. This can hinder the airflow and contribute to overheating.
- Provide adequate space to your router to promote better air circulation.
- Place the router away from heat sources such as microwaves, or stoves.
- Don’t place the router inside a closed cabinet.
If the issue persists even after addressing potential overheating, the next step is to check for possible overloading.
Solution #8: Check If The Router Is Overloaded
If your router continues to blink blue, it might be experiencing an overload. This can occur when the router is handling bandwidth-intensive tasks. You can solve this issue by following the tips given below.
- Disconnect and remove some of the devices connected to your router. Reducing the number of connected devices can reduce strain on the router and improve its performance.
- Limit the number of connections to prevent excessive load on your router.
- If the issue persists, and you still encounter difficulties connecting additional devices, consider investing in a third-party router device that is supported by Verizon FiOS. Upgrading to a more powerful router can enhance your network’s capacity.
- For larger homes with multiple floors, a mesh Wi-Fi system that is supported by FiOS can be beneficial. The purpose of a mesh Wi-Fi system is to extend the network coverage and distribute the load more effectively.
By following these tips, you can alleviate the overload issue and enjoy a more reliable and efficient network connection with the Verizon router.
Solution #9: Install The Latest Firmware Update
If your router is flashing blue even after trying the previous solutions, your router may be using outdated firmware. Here’s what you need to do to install the latest firmware update.
- Go to your router’s admin page and log into your account. You can access this interface through a web browser by entering the router’s IP address.
- Navigate to the System Settings. Now check for any available software updates. If yes, proceed to download them.
- After completing the update process, restart the router to apply the changes and see if the flashing light issue is resolved.
Solution #10: Factory Reset Your Router
If the previous solutions don’t work, consider factory resetting your router. It should be noted that performing a factory reset will erase all settings.
There are two ways you can factory reset a Verizon router.
Method 1: Via Web Interface
- Go to your router’s web interface.
- Access the advanced settings section.
- Click on the option Utilities, followed by Save & Restore.
- Choose Factory Default and then Restore.
Method 2: Via Reset Button
- Take a pin or paperclip.
- Find the reset button on the router.
- Use the pin to long-press the reset button for about 15 seconds.
- Once the router restarts, the connection should be restored.
After the factory reset, your Verizon router will be restored to its default settings. You can now reconfigure it as needed. If the blinking blue light issue persists even after the factory reset, it means the router has a hardware problem.
Solution #11: Contact Verizon Customer Care
If none of the solutions work, it means there’s a problem with your router. In this case, it is advised to contact Verizon’s customer service.
Once you call them, you will get to talk to a technician. They will either try to provide a solution over the phone or send someone to inspect the issue.
Final Words On Verizon Router Blinking Blue Light
Verizon router blinking blue light is a common issue. But it can get annoying if it starts happening frequently. By trying these solutions you should be able to get rid of this problem. For further assistance, you can call Verizon customer support.
Verizon Router Blinking Blue – FAQs
Q1. Does the Verizon router blink blue due to connectivity issues?
Ans: Yes, the Verizon router starts blinking blue if there’s a connection problem.
Q2. Can I fix the Verizon router blinking blue myself?
Ans: In most cases, the blinking blue light on a Verizon router can be fixed with any expert’s assistance.
Q3. Can Verizon customer care solve router issues?
Ans: If you contact Verizon customer support regarding router issues, they will help you fix them.
Q4. How to update a Verizon router’s firmware?
Ans: You can check for firmware updates on Verizon router’s admin page.
Q5. How long does the Verizon router blinking blue issue stay?
Ans: Verizon router blinking issues can last anywhere from a few minutes to several hours. It depends on the reason that’s causing it.