In 2002, Sagemcom was one of the leading service providers when it came to providing a router. Having a Sagemcom router that suits your work is important. Honestly, there’s no point in investing so much money behind a professional to simply install and configure your router. If you have a DIY guide and basic knowledge in front of you it becomes easier to get the job done by yourself. This guide on Sagemcom router login and configuration will surely help you to get the job done faster. Without any further ado, let’s get going with the work.
How Do I Log Into My Sagemcom Router?
Set Up a Sagemcom Router
- The first thing that you need to do is to unplug the router from the original source. You can now keep it aside.
- Let the device cool down a bit and now you can plug the modem back to the power outlet again.
- Now turn on the power and wait for one minute to get it started. To advance the configurations, simply connect it to a new modem.
- The next thing you need to do is to connect the router to the computer. Go to the networks and check for the available networks. Tap on this and connect it to the router.
Logging In to the Router
- Once you are logged into the router, go to the start menu and open up a browser from your PC. Use Google Chrome for fast configuration.
- The next thing that you need to do is to go to the address bar and type down the default IP of your router on the URL. If you need any help, check out our tutorial on How to Find Your Router’s IP Address.
IP addresses Depending on the Sagemcom model you are using:
- Press the enter button and it will lead you to the admin panel of the router. Look for the options mentioned as a username and password that will allow you to get the details.
- The next thing that you need to do is to type down the network name and the password. Usually, it is named as ‘admin’ for the username and ‘password’ as the password.
Using Wireless Login
- Once you connect to the router, you will have to connect to the modem. Wait for the lights to get turned on completely and then you can follow with the next steps.
- Now go to the PC and then search for the wireless settings from your device. Here, you will find all the available wireless devices available here.
- Now you will have to find the matching SSID name on the displays. Once you find it, trap on this, press on the connect button and then it will get disconnected.
- You can now follow the steps mentioned above to get the configuration done. This will help you to complete the procedure.
Below Sagemcom Routers default IP addresses/usernames/passwords:
|MODEL||DEFAULT USERNAME||DEFAULT PASSWORD|
|Fast 3686 V3ch||admin||0000|
|Orange Livebox 3||unknown||unknown|
How to Reset a Sagemcom Router
There are two different procedures that you can follow to reset the router. You can do it either from the main menu and then the reset button available.
Using Wireless Login
- The first thing that you need to do is to log into the router using the username and password.
- The next thing to do is to go to the admin panel. Here, you will find the router settings menu option available.
- Now, go to the maintenance tab present. Click on the reset section and then tap on the reset button present over here.
- Once done, simply leave the router as it is. This device will automatically turn off the device and all the lights will go off.
- This entire procedure will take a few minutes of time. Wait till the lights turn on and you will be able to reboot the router easily.
Using the Reset Button
- The first thing that you need to do is to locate the reset button present in the router.
- Turn on the router and then wait for all the lights to blink. Once it is ready, simply press the button. Hold on the reset button for 10 seconds and then leave the button.
- The lights will immediately turn off in a flash. Wait till the time the LEDs are back and this will indicate that the reset is complete.
- You can now log back to the router again using the old username and password.
How to Configure Sagemcom Router
- To configure the router password and username, you need to first login into the admin panel. Use the previous username and password to log in and then enter the admin panel.
- You will have to click on the access control menu. The interface is simple and easy to use as well. Now click on the user tab where you will find a lot of options.
- Now go to the admin menu present here. Click on this menu and you will be able to configure this step. Click on the new password field.
- Here you will have to enter the new password followed by the confirmed password. Click on save to change the settings.
- Below you will find another option to click on the network name menu. It should be written as the SSID option.
- Change the settings and then get new settings in place. You can now save the changes in the menu and the configuration will be done.
Sagemcom Router Login Troubleshooting
- If you are facing a lot of problems with the router, you may have to reboot the router in the first place. For this, open up the modem and then locate the power cable.
- Turn on the power cable so that the product receives power and it gets turned on. This will obviously set the router and allow the lights to start blinking.
- Now find the reset button that is available just at the back of the router. Once you locate these settings, press the router for at least 10 seconds. Wait till the lights on the router go off.
- Once it gets off, simply leave your fingers and allow it to work on itself. The router is now in the factory reset mode or it is on the reboot program.
- Now you will be able to find that all the LEDs are back in the right place. Wait for 3-5 minutes as resetting the router is a long process and it will take up a minimal time.
- You can surely log in back to the router with the default settings. It takes just a few clicks to the router and it will be back with the default login and the id.
Useful Routers Tips
- The location of the router always matters the most. You need to make sure that the router you place is always in an open space. This will strengthen the signals. check out our tutorial on How to Check Wi-Fi Signal Strength.
- To improve the speed, always make sure that the devices connected to the router are not a long-distance away. Bring it as close to the router as possible.
- Try to get a router combined with a modem. A modem always reduces the latency and also makes it better to use. The bandwidth is never lost and it gives you a great result.
- Never leave the router on while you are not working with this product. Always turning it on increases the heat inside the router! Try to cool down the router at times.
- Always upgrade the router at regular intervals. Upgrading allows your router to adapt to the new technology. It gives you a great advantage.
People Also Ask
Q1. Is Sagemcom fast 5260 a good router?
Ans: Sagemcom is a great product to choose from when it comes to the use of a wireless interface. The 5260 router is surely a great choice providing fast speed with Gigabit Technology. This product is a great choice for everyone who is looking for a professional router. It will surely be a great choice for blazing fast speed.
Q2. What do the lights on my sagemcom router mean?
Ans: To be fair, different lights have different indications on the field. There are three different lights available with power light on the fronts that indicate the Ethernet connection and also the wifi access. If all the lights are blinking properly, it will mean that the router is working fine. Blinking lights will always indicate a good result.
Q3. Do I need both a router and a modem?
Ans: Now this will completely depend on the internet uses and the requirements that you have. If you have a router that gives you around 100 Mbps speed and also you require speed gaming needs, this speed will never be enough. It is important to choose a modem that will improve the latency. It will always give you a better idea.
Q4. How can I contact Sagemcom if I am still facing Problem?
For any technical assistance, you can contact to Sagemcom directly at:
Phone: 0800 006 8978
This guide on the Sagemcom router login will surely help you to complete configuring the router easily. You can easily follow the steps mentioned above to get going. Do let us know if you are facing any more difficulties in the configuration.