Verizon Internet service & Fios promotions provide state-of-the-art internet services in the market. One of the main reasons Verizon can provide such fast broadband connectivity is that they use a fiber-optic network. Even though many broadband providers use the fiber-optic network for their main lines, what sets Verizon apart from other Internet providers is the fact that they use the fiber-optic network all the way to your home. As a result, what you get is a high-speed and quality service. Verizon’s fast broadband service is known as Fios. Installation of Verizon Fios is free. You also get a free wireless router if you sign up online.
How Do I Log Into My Fios Router?
Step 1: To start the procedure, turn on your router and wait for all the lights to start blinking. You will see the default SSID name showing up on available wifi devices. Tap on this to get yourself connected.
Step 2: The first thing you need to do is go to your system admin and leave your Fios username blank. You can now use the default admin password to log in. You will be redirected to the official website.
You can use the default login ID and password for Login Fios Router.
Username: admin
Password: admin
Step 3: The next step is to open up the systems admin console page, where you may get a variable of options, allowing you to alter the settings. You can now follow the steps mentioned below to change the SSID and password.
Step 4: Set up the DSL ISP, key the URL 192.168.1.1 onto your internet browser’s URL address, and you will enter its arrangement page. At “Local IP Address,” located under the Setup a Basic Setup, change it to 192.168.2.1.
Then, click “Save Settings.” You will then have the option to change your IP address to make it your one-of-a-kind own.
Step 5: To change the IP address, enter MS-DOS or Command Prompt. This can be done by tapping the “Start” button on the taskbar, and then from its choices, click “All Programs” then “Accessories” and then “Run command” or you can search for “cmd” and click it.
Step 6: From that point, all the other things will be done utilizing the keyboard, starting with composing “ipconfig/release” and pressing Enter. You will see that your IP address is made out of 0’s.
Step 7: Then, type “ipconfig/restore” and press Enter. You will then get your new IP address that comprises a progression of different numbers.
Step 8: Return to the router’s arrangement page again by entering 192.168.1.1 on your internet browser. When you see at “Status” that the IP address comprises a progression of numbers, congratulations, you have changed your IP address.
How to Configure Fios Router?
The Fios router passwords are arranged simultaneously as the initial router arrangement and can be changed later. However, it is unquestionably important to reset the password to avoid unauthorized access to the router’s website page. Yet, once after having set the password, one is discovering difficulty to recall his Fios router password or has essentially failed to remember it, then adhering to these straightforward directions ought to doubtlessly take care of you.
Step 1: If you have failed to remember your Fios router Login password, reset your Fios router to the primary Step, for example, to its factory default settings, and to reestablish the router configuration to factory defaults, hold the reset button for 30 seconds, which will reset the default name and access IP address also.
Step 2: Reconfigure the entire system again and manage the Fios router passwords by interfacing the Ethernet ports to the PC while signing into the URL http://192.168.1.1/. This will allow you to see a dialog box and ask you for the username and password to log in to your router, wherein you should enter “admin” for both fields. On the more established forms of Fios routers, the default name is blank, and the default password is “admin” yet for the more up-to-date routers (Fios, the default name and the password will be “admin” as it were.
Step 3: When passing off the login screen, the reconfiguration of the router is done. One can now visit the management tab and change the admin password to some other password to avoid access to a router. Post changing the administrator password; enable the WAP or WEP security, so others are denied gaining unauthorized access to your wireless network.
How to Reset Fios Router?
There are two different procedures by which you can reset your Fios Router easily. You can do it either with the help of your Reset button or through the console panel. Either way, you will get a factory reset done properly.
Reset Fios Router Through Button
Step 1: The first thing you need to do is power on your FiOS Router and then allow the router to get connected to your device. Once it gets connected, look for the reset switch available just behind the router.
Step 2: The reset button should be small and a short button just adjacent to your main power switch on the router. Press and hold the FiOS Router at least for 5 to 7 seconds. Wait till all the lights blink together.
Step 3: The next thing that you need to do is to leave your fingers off this reset button. The lights will immediately stop blinking. You can now wait for a few seconds to let the lights turn the power back on. Your router will now undergo a reset, and once it is back on, you can connect to your devices.
Reset FiOS Router Through Interface
Step 1: The first thing that you need to do is to get your router connected to your PC. Allow the steps mentioned above to connect to your PC, and then you can log in to your router.
Step 2: The next thing that you need to do is to enter your console with the help of your username and password. Once you enter the admin console, you will now have to go to the network settings page. Click on this and proceed.
Step 3: You will now have to do to go to the IPv4 settings. Click on the properties option available, and you will get to check the restore factory settings. Click on this and confirm to reset your Fios Router. Once you do this, you will be able to change the configurations.
Note: Remember one thing: once you reset your Fios Router back to the factory settings, your username and password will change back to default settings. You will have to get back to the entire configuration setting steps mentioned above to change your WPA2 security.
Fios Router Login Troubleshooting
- Turn the router on and wait three seconds. After this time is up, utilize a small pen or pencil to hold down the reset button for thirty seconds. Whenever you have completed this, you need to unplug the router’s power rope and hold off for at least one moment before stopping it back in.
- Discover which cable is used to link the PC straightforwardly to the modem that you have. When you have finished this, you will unplug the modem and associate the PC straightforwardly with the router’s primary port.
- Snap-on the internet browser that you use and locate the online configuration panel. This will assist you in establishing the router and any specifications that have to be rounded out. At the point when you have rounded this out to the most awesome aspect of your ability, shut down the PC and router. Delay two minutes before restarting them.
- Associate the modem to the Internet port of the FiOS router. Close everything down and hold for three minutes before restarting. Betray and allow it to boot up. At the point when it is done, turn the PC on.
Conclusion
A weak signal on your wireless association can be the reason for moderate speed or an often dropping network. Attempt to get some guidance on router investigation from an online technical support administration. You can also reset the router to clear the cache. Fios Internet services are one of the most profound and reliable services available all over the country. They have fiber-optic cables worldwide, which is why faster internet connection is provided throughout. Having a Fios router with your internet services could prove to be a handy choice for everyone. In fact, with the help of this, you will be able to perform much better. But if you are still having some problems with your router configuration, this is the exact guide that you need to complete the configuration.
Other Router Login Post:
- AT&T Router Login & Settings Guide | How To Configure & Reset AT&T UVerse Router?
- MediaCom Router Login – Find Default User, Password, IP
- A Quick Guide to Login to the TP-Link Router Login
- How To Connect Computer To Wifi Without Cable?[4 Best Ways For High-Speed Internet]
- Arris Router Login & Settings Guide | How To Configure & Reset Arris Router?
- Sagemcom Router Login Instructions – Username, Password & IP Address
- Spectrum Router Login | How to Configure, Login & Reset Spectrum Router
- How Long Does the Typical Wireless Router Last? [Signs to Look Out For]
I am Editor, in charge of designing content for Routers Network. I aspire to use my experiences in marketing to create reliable and necessary information related to Networking.